The user is responsible for any damage resulting from misuse.
3.1.
Product overview
A. Power cord
B. Handle 1
C. Trigger
D. Hydraulic fluid service cap
E. Handle 2
F.
Bending jaws (optionally straightening)
G. Head
H. Leverage for release
I.
Stand
3.2.
Preparation for operation
POSITIONING OF THE UNIT
The ambient temperature must not exceed 40°C and ambient humidity should not
exceed 85%. Place the unit in a way that ensures good air circulation. Keep the unit
away from any hot surfaces. Always use the device on an even, stable and dry
surface, out of the reach of children and people with reduced mental, sensory and
intellectual functions. Place the unit in such a way that the mains plug can be
reached at any time. Ensure that the power supply to the unit corresponds to that
specified on the identification plate!
IMPORTANT: before the first use and each subsequent use, check the tightness of
the screws securing the bending (or straightening) jaws. Loose cutting jaws
adversely affect the operation of the device, posing a threat to the operator! Also,
worn or damaged cutting jaws can affect the safe use of the machine.