MIRKA PROS 150 Manual Del Usuario página 52

en (original)
PROS
Length
Speed
Noise level
Noise level
Power
Air consumption
Vibration level *
Vibration emission
uncertainty K
*
PROS
Orbit
Vacuum type
Pad size
Product net weight
Height
Length
Speed
Noise Level
Power
Air consumption
Vibration level *
Vibration emission
uncertainty K
*
The noise test is carried out in accordance with EN ISO 15744:2008 – Hand-held non-electric power tools – Noise
measurement code – Engineering method (grade 2).
The vibration test is carried out in accordance with ISO 28927-3 - Hand-held portable power tools – Test method for
evaluation of vibration emission – Part 3: Polishers and rotary, orbital and random orbital sanders.
Specifications subject to change without prior notice. Model range may vary between markets.
* The values stated in the table are derived from laboratory testing in conformity with stated codes and standards and
are not sufficient for risk evaluation. Values measured in a particular work place may be higher than the declared
values. The actual exposure values and amount of risk or harm experienced by an individual are unique to each
situation and depend upon the surrounding environment, the way the individual operates the machinery, the par-
ticular material being worked, work station design and the user's exposure time and physical condition. Mirka Ltd
accepts no responsibility for the consequences of using declared values instead of actual exposure values for any
individual risk assessment.
* * Without dust bag and dust hose.
Further occupational health and safety information can be obtained from the following websites:
https://osha.europa.eu/en (Europe) or http://www.osha.gov (USA)
Proper use of tool
This sander is designed for sanding all types of materials i.e. metals, wood, stone, plastics, etc. using abrasive designed
for this purpose. Do not use this sander for any other purpose than specified, without consulting your Mirka dealer. Only
use Mirka backing pads that are designed for optimal performance with the brake seal. Never mount a backing pad
without a spacing washer. Other backing pads may reduce performance and will increase vibrations.
52
Mirka® PROS 150 mm (6"), 125 mm (5")
525NV 550CV/NV
229 mm (9,02") 229 mm (9,02")
12,000 rpm 12,000 rpm
CV: CV:76 dB(A)
NV:75 dB(A) NV:75 dB(A)
270 W 270 W
485 lpm 485 lpm
2 2
2.8 m/s 2.4 m/s
2 2
0.8 m/s 0.8 m/s
550DB 580DB
5 mm (3/16") 8 mm (5/16")
Self-generated Self-generated
Ø 125 mm (5") Ø 125 mm (5")
0.89 kg (2.0 lbs) 0.91 kg (2.0 lbs)
102 mm (4") 102 mm (4")
229 mm (9,02") 229 mm (9,02")
12,000 rpm 12,000 rpm
81.3 dB(A) 80.9 dB(A)
200 W 200 W
485 lpm 485 lpm
2 2
2.8 m/s 3.5 m/s
2 2
0.8 m/s 0.8 m/s
580CV/NV 625CV/NV
229 mm (9,02") 229 mm (9,02")
12,000 rpm 12,000 rpm
CV:78 dB(A) CV:75 dB(A)
NV:77 dB(A) NV:75 dB(A)
270 W 270 W
485 lpm 485 lpm
2 2
3.8 m/s 2.3 m/s
2 2
0.9 m/s 0.7 m/s
625DB
2.5 mm (3/32")
Self-generated
Ø 150 mm (6")
0.9 kg (2.0 lbs)
102 mm (4")
229 mm (9,02")
12,000 rpm
80.3 dB(A)
200 W
485 lpm
2
2.3 m/s
2
0.7 m/s
650CV/NV 680CV/NV
229 mm (9,02") 229 mm (9,02")
12,000 rpm 12,000 rpm
CV:76 dB(A) CV:77 dB(A)
NV:76 dB(A) NV:74 dB(A)
270 W 270 W
485 lpm 485 lpm
2
3.2 m/s 3.4 m/s
2
0.8 m/s 0.8 m/s
650DB 680DB
5 mm (3/16") 8 mm (5/16")
Self-generated Self-generated
Ø 150 mm (6") Ø 150 mm (6")
0.93 kg (2.1 lbs) 0.95 kg (2.1 lbs)
102 mm (4") 102 mm (4")
229 mm (9,02") 229 mm (9,02")
12,000 rpm 12,000 rpm
78.2 dB(A) 79.7 dB(A)
200 W 200 W
485 lpm 485 lpm
2 2
3.0 m/s 2.5 m/s
2 2
0.8 m/s 0.7 m/s
2
2