MIRKA PROS 150 Manual Del Usuario página 50

en (original)
Declaration of conformity
Mirka Ltd, 66850 Jeppo, Finland
declare under our sole responsibility that the Mirka® products (listed below and see "Technical data" table for particular model) to which
this declaration relates are in conformity with the following standards or other normative documents: EN ISO 12100:2010, EN ISO 11148-
8:2011, EN ISO 15744:2008 & EN ISO 28927-3:2009. In accordance with the directive 2006/42/EC.
®
Products: Mirka PROS 150 mm (6"), 125 mm (5")
Jeppo 12.08.21
Place and date of issue
Original instructions. We reserve the right to make changes to this manual without prior notice.
Important
Read these safety and operating instructions carefully before installing, operating or maintaining this tool. Keep these
instructions in a safe and accessible place. Read and comply with state and local regulations.
Required personal safety equipment
Read
operator's manual
Symbols
Complies with EU relevant standards
Complies with Eurasian conformity requirements
Complies with Serbian conformity requirements
21
Complies with UK relevant regulations
Warning: Potential hazardous situation that may result in death or serious injury and/or property damage.
Caution: Potential hazardous situation that may result in minor or moderate injury and/or property damage.
Please read and comply with
• General Industry Safety & Health Regulations, part 1910, OSHA 2206, available from: Superintendent of Documents;
Government Printing Office; Washington DC 20402
50
Mirka® PROS 150 mm (6"), 125 mm (5")
Company Stefan Sjöberg, CEO
Wear
safety glasses
Manufacturer / Supplier
Mirka Ltd
66850 Jeppo, Finland
Tel. +358 20 760 2111
Fax +358 20 760 2290
www.mirka.com
Wear
ear protection safety gloves
Wear Wear
face mask