Descargar Imprimir esta página

Bimar HF195 Folleto De Instrucciones página 12

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

- If the power cord is damaged, it must be replaced by the
manufacturer or its technical assistance centre or by someone
who is similarly qualified, in order to prevent any risks.
- This appliance is not to be used with an external timer or with
a separate distance control unit. This serves to prevent fire
hazards should the appliance be covered or incorrectly
positioned. Check that other devices with high power
consumption are not connected on the same circuit.
- If installed in a bathroom, the appliance must be installed so
that switches and other control devices cannot be touched by
a person who is in the bath or shower.
 In order to prevent electric shocks, never immerse the plug, the
power cord or the appliance in water or any other liquid.
 If the appliance is not being used, unplug it from the plug point.
 Do not touch the appliance with wet hands or feet.
 Do not move the appliance when it is running.
 Do not allow the appliance to be exposed to the weather (sun,
rain, etc.).
 Should the appliance fail or not work correctly, disconnect the
power cord immediately. Check that it is not damaged, and
thereafter turn it back on: if in any doubt, consult a qualified
professional.
 Do not pull on the power cord or the appliance itself to unplug
the appliance from the plug point.
 Do not pull on the power cord to move the appliance.
 Do not use the appliance if it does not work properly or if it
appears damaged; when in doubt, contact a qualified
technician.
 Ensure the heating element is free of dust, lint, or any similar
material: this improves the fan heater's performance, and
12

Publicidad

loading

Este manual también es adecuado para:

Fh108-s