Descargar Imprimir esta página

Imetec M2-200 Instrucciones De Uso página 13

Ocultar thumbs Ver también para M2-200:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 17
Use the appliance only with the supplied accessories that are an essential
part of the appliance.
DO NOT use extension cords or adaptors .
DESCRIPTION OF THE APPLIANCE AND ITS ACCESSORIES
refer to Figure [A] in the Illustrative Guide to check the contents of the package.
1.
room thermostat
2.
Ioniser warning light (Only for model M2-
200 - Type L4804)
Unpack the product.
Check that it is intact and not damaged.
Pull the cable from the cable reel at the bottom.
Connect the product to the domestic mains.
WARNING! This appliance is not to be used if it has been dropped
or if there are visible signs of damage.
For fan operation, move the power switch (4) to the cool air position and adjust the ambient
thermostat (1) to the maximum temperature.
To obtain hot air, move the power switch (4) to the hot air position and adjust the ambient
thermostat (1) to the required temperature.
To obtain very hot air, move the power switch (4) to the very hot air position and adjust the
ambient thermostat (1) to the required temperature.
To switch the appliance off, turn the power switch (4) to off.
SYMBOLS
Warning
Prohibited
Do not cover
Anti-freeze
Appliance OFF
PREPARATION
Cool air
Hot air (1100 W)
Very hot air (2200 W)
Max temperature
Note
3.
Operation warning light
4.
Power switch
5.
Technical data
USE
EN
11

Publicidad

loading

Este manual también es adecuado para:

L4803L4804