Publicidad
Idiomas disponibles
Idiomas disponibles
Connecting to External Equipment
Connecting a PC
Refer to page 47 for a list of PC signals compatible with the TV.
When using HDMI cable (INPUT 1, 2, 3 or 4):
• Depending on the board, only video signals may be output. In this case, in addition to connecting an HDMI-certifi ed cable
to the INPUT 1, 2, 3 or 4 terminal, connect a Ø 3.5 mm stereo minijack cable to the AUDIO PC/HDMI terminal and set
"Audio Select" to "HDMI+Analog". (See page 27.)
• The HDMI terminals only support digital signal.
When using DVI-HDMI conversion cable (INPUT 1, 2, 3 or 4):
• When using a DVI-HDMI conversion cable, you should make an analog audio connection. In this case, in addition to
connecting a DVI-HDMI conversion cable to the INPUT 1, 2, 3 or 4 terminal, connect a Ø 3.5 mm stereo minijack cable
to the AUDIO PC/HDMI terminal and set "Audio Select" to "HDMI+Analog". (See page 27.)
When using analog RGB cable (PC IN):
• When using an analog RGB cable, input the audio signal to the AUDIO PC/HDMI terminal of PC IN.
• When connecting a PC to the PC IN, set "Audio Select" to "Video+Audio". (See page 27.)
16
HDMI-certified cable
HDMI OUT
Ø 3.5 mm stereo minijack cable
AUDIO
DVI OUT
DVI-HDMI conversion cable
(D-sub 15-pin cable or VGA cable)
Ø 3.5 mm stereo minijack cable
RGB
AUDIO
Analog RGB cable
INPUT 3
INPUT 4
AUDIO
PC/HDMI
INPUT 3
INPUT 4
PC IN
AUDIO
PC/HDMI
Publicidad
