Sharp AQUOS LC-46LE540U Manual De Operación página 33

On-Screen Display Menu
Reactivating the temporarily released V-CHIP
BLOCK
You can reactivate the temporarily released V-CHIP
BLOCK as shown below.
• Select "Status" setting from the Parental CTRL menu to
reactivate BLOCK. (See page 29.)
• Select "V-Chip" setting ("MPAA", "TV Guidelines", "Can.
English Ratings" or "Can. French Ratings") from the
Parental CTRL to reactivate BLOCK. (See pages 29 to 31.)
• Switch off the TV power.
• Performing any of the three above will activate the V-CHIP
BLOCK.
Information
Example
Menu
Information
Information
Identification
Software Update
Netflix Help
Vudu Help
1
Press MENU to display the MENU screen, and then
press c / d to select "Information".
2
Press a / b to select a specific adjustment item,
and then press ENTER.
3
Press a / b (or c / d ) to select the desired setting,
and then press ENTER.
4
Press MENU to exit.
Identification
The current version of the TV software is displayed.
Software Update
This is used to upgrade the system software to
enhance the TV functions.
1
Press MENU to display MENU screen, and then
press c / d to select "Information".
2
Press a / b to select "Software Update", and then
press ENTER.
• If you have already set the Secret No., go to step 3.
Example
Information
Information
Identification
Software Update
3
Input the 4-digit secret number by using 0-9.
Software Update
Input Secret No.
4
Press a / b to select "Manual Update" or "Auto
Update Setting", and then press ENTER.
• The operations thereafter vary depending on the setting.
Manual Update
Select the method for manually updating the software.
USB Update: Updates the software using a USB memory
device containing the update file. (See page 32 to 33.)
Network Update: Downloads the update file via the
network and then updates the software. (See page 32.)
• A broadband connection and Internet Setup are required to
update the software using the network. (See pages 49 to
53.)
• It may take time to access and download the update
depending on the Internet connection and other factors.
Auto Update Setting
When the TV enter Standby, this function enables the
TV to connect to the network and check for updates
automatically.
Yes: Enables Auto Update Setting.
No: Disables Auto Update Setting.
Menu
31