Publicidad
Idiomas disponibles
Idiomas disponibles
Using AQUOS LINK
Playback of Titles Using AQUOS LINK
This section explains how to play back a title in the
AQUOS LINK-compatible equipment.
1
Power on the AQUOS LINK-compatible equipment,
and select appropriate external input.
2
Press OPTION to display the Link Operation Menu
screen.
3
Press a / b to select "Play from Rec. List", and
then press ENTER.
• The title list data from the connected
compatible equipment
4
Select the title with a / b / c / d , and then press d
to start playback.
• This function works only when AQUOS LINK-compatible
equipment is connected.
Displaying the Setup Menu of AQUOS
LINK-Compatible Equipment
You can call up a setup menu from the connected
AQUOS LINK-compatible equipment.
1
Press OPTION to display the Link Operation Menu
screen.
2
Press a / b to select "Show Start Menu", and then
press ENTER.
• The setup menu of the AQUOS LINK-compatible
equipment is displayed.
• Depending on the status of the equipment (recording or in
standby mode, etc), the setup menu will not be displayed.
• The setup menu will not be displayed with the player
BD-HP20U currently available.
Selecting Media Type for AQUOS LINK-
Compatible Recorder
You can switch the media (HDD or DVD) for playback
or recording on the AQUOS LINK-compatible recorder.
1
Press OPTION to display the Link Operation Menu
screen.
2
Press a / b to select "Change Media of Device",
and then press ENTER.
3
Select the desired media such as HDD or DVD.
• The Media type toggles each time you press ENTER in
"Change Media of Device".
• Select the media to be operated by the player.
Timer Recording
You can call up the AQUOS LINK-compatible
recorder's EPG and preset timer recordings using the
TV's remote control.
1
Press OPTION to display the Link Operation Menu
screen.
2
Press a / b to select "Link Booking (Rec. Book)",
and then press ENTER.
• The recorder's EPG is displayed.
AQUOS LINK-
displays.
3
Select the program to record.
• You can use a / b / c / d , ENTER, RETURN, EXIT and
the colored buttons.
• This function works only when an AQUOS LINK-compatible
recorder is connected.
• Refer to the operation manual of the recorder for details.
Listening with the AQUOS AUDIO Speaker System
You can select to listen to the TV sound only from the
AQUOS LINK-compatible audio system and manually
change its sound mode.
1
Press OPTION to display the Link Operation Menu
screen.
2
Press a / b to select "Change Audio Output
Device", and then press ENTER.
3
Press a / b to select "By AQUOS audio SP", and
then press ENTER.
• The sound from the TV speaker is muted and only the
sound from the AQUOS LINK-compatible audio system
is audible.
• You can use VOL k / l and MUTE.
Select "By AQUOS SP", and then press ENTER to
listen to the TV sound.
HDMI Device Selection
If multiple HDMI devices are connected in a daisy
chain, you can specify which device to control here.
1
Press OPTION to display the Link Operation Menu
screen.
2
Press a / b to select "HDMI Device Selection",
and then press ENTER. The HDMI device toggles
each time you press ENTER.
Displaying the Link Operation Menu
1
Press OPTION to display the Link Operation Menu
screen.
2
Press a / b to select "AQUOS LINK Setup", and
then press ENTER.
• The AQUOS LINK Setup menu screen is displayed.
45
Publicidad
