Publicidad
Idiomas disponibles
Idiomas disponibles
On-Screen Display Menu
• "DI Film Mode" does not function depending on input signal
type.
• "Auto" does not function when channel display shows
an input signal resolution of 480p, 720p, or 1080p.
• "DI Film Mode" is not available during PC format input.
Digital Noise Reduction
Produces a clearer video image.
Auto: Automatically adjusts the level of noise reduction.
High/Medium/Low: Select a desired level for viewing a
clearer video image.
Off: No adjustment.
• "Digital Noise Reduction" is not available when you set
PC format is being input.
Audio Settings
You can adjust the sound quality to your preference
with the following settings.
Example
Menu
Audio
Settings
Audio Settings
Treble
[ 50]
Bass
[ 50]
Balance
[
[
0]
Surround
[On]
Reset
1
Press MENU to display the MENU screen, and then
press c / d to select "Audio Settings".
2
Press a / b to select a specifi c adjustment item.
• Select "Surround", and then press ENTER to set each
item.
3
Press a / b to select the desired setting, and then
press ENTER.
4
Press MENU to exit.
Selected item
c button
Treble
For weaker treble
Bass
For weaker bass
Balance
Decrease audio
from the right
speaker
• For resetting Audio adjustment items to the factory preset
values, press a / b to select "Reset", press ENTER, press
a / b to select "Yes", and then press ENTER.
Surround
The surround function produces Surround effect from
the speakers.
• For some discs, setup may be required on your DVD/BD
Power Control
Power control setting allows you to save energy.
1
2
3
4
Power Saving
This function allows you to set the Power Saving level
in order to decrease the power consumption and
increase the backlight lifespan.
d button
• "Power Saving" does not function when you set AV MODE
For stronger treble
For stronger bass
No Signal Off
Decrease audio
from the left
This function allows the TV to automatically shut the
speaker
power down when there is no signal received.
• When it is 5 seconds before the power shuts down,the
On: Makes it possible to enjoy natural, realistic surround
sound.
Off: Outputs the normal sound.
player. In this case, please refer to the operation manual of
your DVD/BD player.
Example
Menu
Power
Control
Power Control
No Signal Off
[Disable]
Power Saving
[On]
Press MENU to display the MENU screen, and then
press c / d to select "Power Control".
Press a / b to select a specifi c adjustment item,
and then press ENTER.
Press a / b to select the desired setting, and then
press ENTER.
Press MENU to exit.
On: Optimizes power reduction based upon video
content.
Off: This function does not work.
to "DYNAMIC (Fixed)".
Enable: The power will automatically shut down if there is
no signal for 15 minutes.
Disable: This function does not work.
screen will display"No signal. The power will be turned off."
25
Publicidad
