Publicidad
Idiomas disponibles
Idiomas disponibles
Watching TV
Turning On/Off the Power
POWER (On/Standby)
Press POWER on the TV or on the remote control unit
to turn the power on.
• The Initial Installation starts when the TV powers on for the
fi rst time. If the TV has been turned on before, the Initial
Installation will not be invoked. For changing the settings of
the Initial Installation, perform "EZ setup" on the Initial Setup
menu on page 28.
Press POWER on the TV or on the remote control unit
again to turn the power off.
• The TV enters standby and the image on the screen
disappears.
• If you are not going to use this TV for a long period of time,
be sure to remove the AC cord from the AC outlet.
• Weak electric power is still consumed even when the TV is
turned off.
Initial Installation
When you turn on the TV for the fi rst time, it will
automatically memorize the broadcasting channels
available in the region where you live. Perform the
following steps before you press POWER on the
remote control unit.
1. Insert the batteries into the remote control unit. (See page 9.)
2. Connect the antenna cable to the TV. (See page 9.)
3. Plug in the AC cord to the AC outlet. (See page 8.)
Language (Language setting)
Select from among 3 languages: English, French and
Spanish.
1
Press a / b to select the desired language listed
on the screen, and then press ENTER.
TV Location
Select "Home" or "Store" for the location where you
plan to install the TV. This product qualifi es for ENERGY
STAR in Home mode default setting.
2
a / b
Press
to select "Home" or "Store".
Press ENTER to enter the setting.
POWER
English
Français
Español
Select where the TV will be placed.
the picture will be optimized for
that location.
Home: "Power Saving" is set to "On", and AV MODE is set
to "STANDARD".
Store: "Power Saving" is set to "Off" and AV MODE is set
to "DYNAMIC (Fixed)".
• ENERGY STAR qualifi cation is based on AV MODE
"STANDARD".
Air/Cable (Antenna setting)
Make sure what kind of connection is made with your
TV when selecting "Air" or "Cable".
3
/
a b
Press
to select "Air" or "Cable".
Press ENTER to enter the setting.
CH Search (Channel search)
Channel auto search makes the TV look for all
channels viewable in the set area.
4
When "Air" or "cable" is selected in Antenna
setting:
/
to select "Start", and then press ENTER.
Press
a b
Completed
5
After setting complete.the screen will show EZ
setup Completed.
EZ Setup Completed
• If no channel is found, confi rm the type of connection
made with your TV and try "EZ Setup" again.
(See page 28.)
• For changing the settings of the Initial Installation, perform
"EZ setup" on the Initial Setup menu on page 28.
Home
Store
Air
Cable
Start
Cancel
17
Publicidad
