Publicidad
Idiomas disponibles
Idiomas disponibles
4
Z
• Do not use any sharp tool (cutter, knife...) when unboxing, you
A
may damage the product.
O
• When unboxing, take the pump with the carrying handle (7)
N
• Do not use the power cord to lift, carry or transport the
machine.
• Do not scrape the power cord across sharp edges and ensure
that it does not get pressed.
4.2 INSTALLATION
Tightly screw the pump
Attach the pump to a flat level surface with suitable screws and silent block if necessary.
Suction hose
Assemble the different elements together according to the illustration. In case screw are necessary : tight
it with appropriate tool.
• As a basic principle, we recommend using:
- A preliminary filter, in order to avoid unnecessary damage to the pump as a result of stones and solid
foreign bodies.
- A suction-hose set with suction hose and an check valve with a strainer (in order to prevent long
priming periods).
• If you cannot obtain a suction-hose set, please purchase :
- an 25 mm (1") intake hose
- a check valve with a strainer
- 2 hose clamps 2 standard adapters (one for the suction hose, one for the discharge line) and assemble
the suction-hose set yourself using a standard adapter and a clamp.
Attach the filter to the wall. Make sure that the vibrations of the pump do not damage this
installation (flexible connection is strongly recommended)
4.3 FIRST USE
Pay particular attention using the machine for the first time : focus and dedicate all your attention to this
first use.
Setting up your pump
illustration 2.2
DANGER! Risk of injury due to electric shock.
Warning! Do not plug in before installation is fully completed !
CAUTION ! Always wear safety glasses and gloves during
installation.
illustration 2.3
WARNING ! Read the « SAFETY INSTRUCTION » section at the
beginning of this manual including all text under subheading
therein before using this product.
12
199
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
FR
EN
ES
PT
IT
EL
PL
RU
KZ
UA
RO
EN
Publicidad
