Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Fitting Kit
K324W
Fitment
Place crossbar on vehicle. Minimum
recommended spacing between the bars is
700mm (27 1/2") (unless otherwise stated).
Place crossbar into gutter of vehicle.
Adjust crossbar in or out to suit vehicle.
Refer to the crossbar instructions for
crossbar adjustment.
Loosely position crossbar ensuring the
guttermount blade is hard against the
inside of the vehicle gutter.
Tighten adjusting screw to 2 Nm (1.5 ft lb)
hand tight.
6
Publicidad
