Siemens milltronics MSI Guia De Inicio Rapido página 3

Milltronics MSI/MMI Belt Scale
Quick Start Manual
This manual outlines the essential features and functions of Milltronics MSI/MMI Belt Scale. We
strongly advise you to acquire the complete manual so you can use your belt scale to its fullest
potential. The complete manual can be downloaded from the product page of our web site at:
www.siemens.com/processautomation. The printed manual is available from your local
Siemens Milltronics representative.
Questions about the contents of this manual can be directed to:
Siemens Milltronics Process Instruments Inc.
1954 Technology Drive, P .O. Box 4225
Peterborough, Ontario, Canada, K9J 7B1
Email: techpubs.smpi@siemens.com
Copyright Siemens Milltronics
Process Instruments Inc. 2008.
All Rights Reserved
We encourage users to purchase autho-
rized bound manuals, or to view elec-
tronic versions as designed and
authored by Siemens Milltronics Process
Instruments Inc. Siemens Milltronics
Process Instruments Inc. will not be
responsible for the contents of partial or
whole reproductions of either bound or
electronic versions.
Milltronics is a registered trademark of Siemens Milltronics Process Instruments Inc.
Technical Support
Support is available 24 hours a day.
To find your local Siemens Automation Office address, phone number and fax number go to:
www.siemens.com/automation/partner:
• Click on the tab Contacts by Product then find your product group (+Process Automation
> +Process Instrumentation > +Weighing Technology> Continuous Weighing).
• Select the team Technical Support. Click on Next.
• Click on a continent, then a country, followed by a city. Click on Next.
For on-line technical support go to: www.siemens.com/automation/support-request
• Enter the device name (MSI belt scale) or order number, then click on Search, and select
the appropriate product type. Click on Next.
• Enter a keyword describing your issue. Then either browse the relevant documentation,
or click on Next to email a description of your issue to Siemens Technical Support staff.
Siemens A&D Technical Support Center:
7ML19985XK81
While we have verified the contents of this manual
for agreement with the instrumentation described,
variations remain possible. Thus we cannot guar-
antee full agreement. The contents of this manual
are regularly reviewed and corrections are
included in subsequent editions. We welcome all
suggestions for improvement.
Technical data subject to change.
Milltronics MSI/MMI – QUICK START MANUAL
Disclaimer of Liability
phone +49 180 50 50 222
fax +49 180 50 50 223
Page EN-1