Hisense HAF2900D Manual De Instrucciones página 60

you press and hold the time control key icon, the time will be continuously adjusted.
The time can be adjusted from 1 min to 60 min for each recipe.
3.1.5. When you set the recipe, temperature, and time, touch the power key icon. The left
pan starts operating, and the current cooking time will be counting down on the
display unit.
3.1.6. To adjust the temperature or time during the cooking process, press the temp or time
key icon once, then pressing the temp or time key icon to adjust the temperature or
time. During the adjustment process, the unit keeps working.
3.1.7. To reset the recipe during the cooking process, lightly press the power key icon once
to pause it; the heater and the motor will stop working. Then, follow steps 3.1.2 –
3.1.5 to reset the recipe, and resume operation.
3.2. Pause or turn off the unit during the cooking process
3.2.1. To pause the cooking process while it is in progress, press the power key icon once
to pause the heating and motor function. If there is no following operation within 3
minutes after pausing the unit, the unit will enter standby mode.
3.2.2. To turn off the unit during cooking, press and hold the power key icon for 2 seconds
until "OFF" appears on the display unit. The buzzer will beep once, the display will go
off and the appliance will enter standby mode. Then, press and hold the power key
icon for 2 sec, and the unit will enter boot mode.
3.3. Removing the pot
3.3.1. If the pot is removed from the appliance at any time , the display will read "OPEN".
3.3.2. If the pan is removed during the cooking process, the unit will stop working (both
heating and motor will be stopped). When the pot is replaced, the unit will resume
operation with the most recent settings.
3.4. The right pot operating mode
3.4.1. Touch the right pot key icon, then refer to sections 3.1.2 – 3.1.7 for subsequent
steps.
3.5. Cooking process is completed
3.5.1. When the cooking process is completed, the display reads "OFF" and the unit beeps
5 times. Then, the display will go off, and the unit will enter standby mode.
4. Double pot operating mode
4.1. Starting the 2 pots
4.1.1. First, select one side and choose the menu settings, temperature, and time
according to steps 3.1.2–3.1.7. Then, select the other side and set the required
recipe, temperature, and time in the same way.
4.1.2. Press the power key icon. Both pots start operating at the same time. Countdown of
the remaining time for both sides will be shown on the display unit.
4.1.3. Alternatively, you can also first started only one side as per 3.1.1 to 3.1.7, and then
start the operation of the other side as per 3.5.1.
4.2. Choose the settings for the double-pot operating mode
4.2.1. In the double-pot operating mode, the two pots operate at the same time. To set the
temperature or time for left pot or the right pot, press the left pot key or the right pot
key, then follow steps 3.1.6 and 3.1.7 to complete the setting.
4.3. Pausing or turning off the unit during the cooking process
4.3.1. To pause the operation of one side only during the double pot operating mode, first
press the left or right pot key icon, and then press the power key icon. Operation of
the corresponding pot will be paused. If there is no operation within the next 3
minutes, the paused side will switch to standby mode. To pause both sides, just
press the power key icon and both sides will be paused. If there is no further
operation within the next 3 minutes, both sides will enter standby mode. To resume
operation, press the power key icon once.
4.3.2. To turn off one side during the cooking process, first press the left or right pot key
icon, and then press and hold the power key icon for 2 seconds. Then, the selected
pot (or side) will switch to standby mode. To turn off both sides, press and hold the
power key icon for 2 seconds.
4.4. Removing the pot
51