Bestron ACM900TD Manual Del Usuario página 25

OPERATION - Overpressure protection
The thermal carafe is equipped with an overpressure protection, which makes sure that the pressure inside
the carafe can not rise too high. The process of pouring coffee should therefore be done as follows:
1
1. First press the thermal carafe's release button (9).
2. Only then tilt the thermal carafe to pour the coffee.
WARNING:
• If the above sequence is not followed, the thermal carafe can start to leak.
CLEANING AND MAINTENANCE
1. Switch off the appliance, take the plug out of the socket, and allow the coffee maker to cool.
2. Open the lid. Dispose of the paper filter or remove the permanent filter and the filter holder from the
casing, clean it in warm water and dry it thoroughly.
3. Clean the thermal carafes in hot washing-up water.
4. Clean the outside of the appliance with a damp cloth. Make sure no moisture gets into the appliance.
WARNING:
• Never immerse the appliance, plug or power cord in water. Never put the appliance in a dishwasher.
Only the loose parts may be immersed in water.
• Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes) to
clean the appliance.
CLEANING AND MAINTENANCE - Descaling
Limescale can reduce the efficiency of your coffee maker. Limescale is common in areas with hard water.
We advise the use of a suitable descaling agent to remove any scale. Always follow the instructions for the
descaling agent. The amount of scale will be reduced when you use a water softener.
2
25
EN