Publicidad
Idiomas disponibles
Idiomas disponibles
LVQD3
Displaying Software Revision and Cycle Counts on LCD Display
The master control board has an LCD screen that continuously displays information about the software version and cycle counts
for the soap, water and dryer. To view the LCD display:
1. Open the access panel.
2. Locate the LCD screen on the master control board. The display will cycle through the software revision and counts.
Cycle counts are displayed x1000 (ex. 65 = 65,000)
• REV followed by the software revision
• SOP followed by the soap cycle count
• H2O followed by the water cycle count
• AIR followed by the dryer cycle count
24
2/4/2019
Bradley • 215-1844 Rev. E; ECN 18-08-023
Installation
Publicidad
