Stanley ST-12F-E Manual De Instrucciones página 25

Installation and Assembly
Tools Needed:
Pliers
Phillips head screwdriver
Flat head screwdriver
Adjustable wrench
BEFORE FIRST USE
1. Unpack the product and keep all of the packaging
until you are sure the device is undamaged and
working properly.
2. Read the instruction manual carefully before the first
use.
3. Take the product out of the packaging. Store and
dispose all of the packaging in a responsible way.
Plastic wrapping can be a suffocation hazard for
babies and young children, so ensure all packaging
materials are out of their reach.
4. Before each use, check that the product is not
damaged or worn. Do not use the product if any
part of it is damaged.
Front Grill
M5 x14 mm
© 2023, Obelis S.A Registered Address:
Bd. Général Wahis, 53 1030 Brussels, Belgium
ST-30D, ST-36D
M6 x 14mm
Motor
Blades
mm
M6 x 8
M4 x 14 mm
Body of Fan
Foot
M6 x 14mm
Wheel
NEVER LEAVE A FAN UNATTENDED WHILE
OPERATING OR WHILE CONNECTED TO A
POWER SOURCE
ASSEMBLING:
1. Remove the packaging materials.
2. Assemble the two wheels as shown in the below
images. The longer part of the wheel axle should
be mounted at the back side of machine in order
to make sure the stability of fan.
M6 x 14mm M5 x 12 mm
9
Handle
Back Grill
M4 x 10mm
Front Control Box
Foot
Foot Pad
Sleeve
M9 x 70 mm
Connecting Pipe
Control Box