Descargar Imprimir esta página

Powersmart PSSMN24 Manual Del Usuario página 5

Ocultar thumbs Ver también para PSSMN24:

Publicidad

Idiomas disponibles

Idiomas disponibles

TRAINING
Read, understand, and follow all instructions on the machine and in the manual(s) before attempting to
assemble and operate. Keep this manual in a safe place for future and regular reference.
Be familiar with all controls and their proper operation. Know how to stop the machine and disengage
them quickly.
Never allow children under 14 years of age to operate this machine. Children 14 and over should read
and understand the instructions and safe operation practices in this manual and on the machine and be
trained and supervised by an adult.
Never allow "non-trained" adult personnel to operate this machine without proper instruction.
Thrown objects can cause serious personal injury. Plan and map out your snow-throwing pattern to
avoid discharge of material toward roads, bystanders, and the like.
Keep bystanders, pets and children at least 75 feet from the machine while it is in operation. Stop
machine if anyone enters the area.
Exercise caution to avoid slipping or falling, especially when operating in reverse.
PREPARATION
Thoroughly inspect the area where the equipment is to be used. Remove all doormats, newspapers, sleds,
boards, wires, branches and other foreign objects, which could be hazardous and damage the auger
system.
Always wear safety glasses or eye shields during operation and while performing an adjustment or
repair to protect your eyes, as thrown objects can ricochet and cause serious injury to the eyes.
Do not operate without wearing adequate, winter outer garments. Do not wear jewelry, long scarves
or other loose clothing, which could become entangled in moving parts, and wear footwear that will
improve footing on slippery surfaces.
Use a grounded "three-wire" extension cord and receptacle for all machines with electric start
engines.
Adjust skid shoe and/or housing height to clear gravel or crushed rock surfaces.
Disengage all control levers before starting the engine.
Never attempt to make any adjustments while engine is running, except where specifically
recommended in the instruction manual.
Let engine and machine adjust to outdoor temperature before starting to clear snow.
5

Publicidad

loading