Greencut GLM880X Manual De Instrucciones página 101

THE MACHINE HAS LOST SELF-PROPULSION:
POSSIBLE FAULT
Belt cut
Belt has come off the pulley
Wheel gears have come off
GRASS CUTTING IS POOR
POSSIBLE FAULT
Blades dull or damaged
Cutting too much in one pass.
Cutting height not suitable.
NOTE: If you are unable to resolve the problem, please contact the Official Technical Service.
replace belt
Remove the belt cover and replace the belt on the pulleys, first clean off any
dry grass.
Remove the wheels and check that the drive gears are in place and secure.
Sharpen or replace cutting blades.
Adjust the cutting height and rate of mowing to reduce load on the engine.
For tall or very thick grass, cut in several passes. Do not attempt to cut beyond
the capacity of the machine.
Adjust cutting height as required.
SOLUTION
SOLUTION
101
EN