JVC DLA-RS2 Manual De Instrucciones página 29

Source > Aspect (When SD video signals are being input)
S
Aspect
Configures the screen size (aspect ratio) of the projected image.
4:3
16:9
Zoom
This setting can also be configured from the remote control. (pP12, 22)
Source > V-Stretch (When HD video signals are being input)
T
V-Stretch
When set to "On", the projected 2.35:1 image will be stretched vertically to the panel resolution.
Off
On
"Off"
Source > Resize (When PC signals are being input)
U
Resize
Sets the screen size of the projected image.
Aspect
Panel
1:1
"Aspect"
XGA(1024 x 768)
Source > Film Mode
V
Film Mode
Select this to view movies shot on film.
Auto
Off
This setting is not available when PC signals are input to HDMI terminal.
Sets screen size of the projected image to 4:3.
Sets screen size of the projected image to 16:9.
Zooms the image.
Projects the 2.35:1 image as-is. (Black bands will be displayed on the top and bottom.)
The projected 2.35:1 image will be stretched vertically to the panel resolution.
Enlarges the PC signal horizontally/vertically until it fits the panel height, and displays it
in the original aspect ratio.
Enlarges the PC signal horizontally/vertically, and displays it in 16:9 aspect ratio.
Displays the PC signal corresponding to the panel at one dot per pixel ratio. The PC
screen can be shown in the original size.
"Panel"
XGA(1024 x 768)
For normal circumstances, select this setting.
Select this when you are not watching movies shot on film.
ENGLISH
"On"
"1:1"
XGA(1024 x 768)
29