Publicidad
Idiomas disponibles
Idiomas disponibles
12. INSTALL THE BLOWER
(INTERIOR OR EXTERIOR BLOWER)
Refer to instructions included with blower.
A
Once the blower is installed, plug the power supply to the 3-prong male connector (A)
B
and the blower unit into the 2-prong female receptacle (B) inside the hood.
WARNING
! !
VQ0010
Do not plug the two cords into each other.
HE0003
13. INSTALL THE CALIBRATION BUTTON BRACKET IN THE HOOD
(iQ6 INTERIOR BLOWER ONLY)
The iQ6 blower is equipped with a calibration button already mounted to its own bracket.
Install this bracket in the hood, using 2 screws provided with iQ6 interior blower.
See additional details in the iQ6 blower instructions included with the blower.
HD0548
9
Publicidad
