Publicidad
Idiomas disponibles
Idiomas disponibles
18. Carefully center the mounting
bracket directly over the range hood
location. Fig. 19.
19. Secure the bracket assembly to
the ceiling using (2) 4.8 x 38 mm
mounting screws and dr ywall
anchors. Make sure the bracket
is pushed into the corner, tight
against the wall and centered over
the hood.
20. Press discharge collar / damper into
blower duct connector. Fig. 20.
21. Install an appropriate wall or roof
cap, with damper, to exhaust air to
the outside. Run 6" round metal duct
to the outside location.
22. Tape all duct joints with aluminum
duct tape.
23. Plug power cord into 120V wall
outlet. Fig. 21.
24. Install upper and lower decorative
flue onto range hood. Tabs on lower
flue engage slots on top of hood.
Fig. 22.
25. Secure upper flue to flue mounting
bracket with (2) 3.9 x 6 mm screws.
DISCHARGE
3.9 x 6mm
SCREWS (2)
FIG.22
- 12 -
CENTERLINE
DRYWALL
ANCHORS
MOUNTING
BRACKET
4.8 x 38 mm
SCREWS
COLLAR
OF HOOD
FIG.19
6"
ROUND
DUCT
FIG.20
POWER
CORD
FIG.21
Publicidad
