Publicidad
Idiomas disponibles
Idiomas disponibles
value that can be established, it will jump to the highest adjustable temperature value automatically.
After stopping pressing the button for 5 seconds, LED figure will stop flash, then exit setting model.
Upper compartment::the temperature setting can be adjusted from 5°C to 20°C.
Middle compartment: the temperature setting can be adjusted from 5°C to 10°C.
If you want to know the actual temperature, please press
will show actual temperature. After 5 seconds, it will show the setting temperature.
The controls of your wine cooler (the lower zone)
1) "
" indicator light
Compressor in operation display.
2) LED display window
Display temperature for lower zone.
3) "
" button (right)
To set the temperature of the lower chamber.
Press once the button, the temperature will increase 1°C.
4) "
" button (right)
To set the temperature of the lower chamber.
Press once the button, the temperature will decrease 1°C.
Setting the temperature control
To set the temperature:
When pressing
compartment automatically. The LED will flashing and display the setting temperature.
Press once the button, the temperature will decrease or increase 1°C. When exceeding the minimum
value that can be established, it will jump to the highest adjustable temperature value automatically.
After stopping pressing the button for 5 seconds, LED figure will stop flash, then exit setting model.
The temperature setting can be adjusted from 10°C to 20°C.
Function instruction
Temperature alarm:
If inner temperature is higher than 23°C after running 10 hours with power, the "HI" is shown in display
panel, and the buzzer alarm after one hour continuously. It informs that the inner temperature is too
high, please check the reason. If inner temperature is lower than 0°C, the "LO" is shown in display
panel, and the buzzer alarm too will sound.
Temperature recollection function:
In the event of a power interruption, wine cabinet will remember the previous temperature settings and
when the power is recovered, the cabinet temperature will go back the same setting temperature as
power off.
or
button, the system will be entering the set up mode in the lower
or
for 3 seconds, display panel
41
Publicidad
