Forch 5331 1 18 3 Manual Original página 16

can bend, causing breakage or loss of control,
resulting in personal injury.
Additional safety information
Use suitable detectors to determine if there
u
are hidden supply lines or contact the local
utility company for assistance. Contact with
electric cables can cause fire and electric shock.
Damaging gas lines can lead to explosion.
Breaking water pipes causes property damage.
Always wait until the power tool has come to
u
a complete stop before placing it down. The
application tool can jam and cause you to lose
control of the power tool.
Secure the workpiece. A workpiece clamped
u
with clamping devices or in a vice is held more
secure than by hand.
In case of damage and improper use of the
u
battery, vapours may be emitted. The battery
can set alight or explode. Ensure the area is
well ventilated and seek medical attention
should you experience any adverse effects. The
vapours may irritate the respiratory system.
Do not open the battery. There is a risk of
u
short-circuiting.
The battery can be damaged by pointed ob-
u
jects such as nails or screwdrivers or by
force applied externally. An internal short cir-
cuit may occur, causing the battery to burn,
smoke, explode or overheat.
Only use the AMPShare battery in the
u
manufacturer's products or those of the
AMPShare partners. This is the only way in
which you can protect the battery against dan-
gerous overload.
Protect the battery against heat, e.g.
against continuous intense sunlight,
fire, dirt, water and moisture. There is
a risk of explosion and short-circuiting.
Do not touch any application tools or adja-
u
cent housing components shortly after oper-
ation. These can become very hot during oper-
ation and cause burns.
The application tool may jam during drilling.
u
Make sure you have a stable footing and
hold the power tool firmly with both hands.
Otherwise you could lose control of the power
tool.
Take care when carrying out demolition
u
work using the chisel. Falling fragments of the
demolition material could injure you or any
bystanders.
Hold the power tool firmly with both hands
u
and make sure you have a stable footing.
16 | English
The power tool can be more securely guided
with both hands.
Product Description and
English
Specifications
Please observe the illustrations at the beginning of
this operating manual.
Intended Use
The power tool is intended for hammer drilling in
concrete, brick and stone, as well as for light chis-
elling work. It is also suitable for drilling without im-
pact in wood, metal, ceramic and plastic. Power
tools with electronic control and right/left rotation
are also suitable for screwdriving.
Product Features
The numbering of the product features refers to
the diagram of the power tool on the graphics
page.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
(16)
a) Accessories shown or described are not included
English
Read all the safety and general in-
structions. Failure to observe the
safety and general instructions may
result in electric shock, fire and/or seri-
ous injury.
English
English
SDS plus drill chuck
SDS plus tool holder
Dust protection cap
Locking sleeve
Button for depth stop adjustment
Release button for impact/mode se-
lector switch
Impact/mode selector switch
Rotational direction switch
On/off switch
Handle (insulated gripping surface)
a)
Battery
Worklight
Battery release button
Auxiliary handle (insulated gripping sur-
face)
Depth stop
Universal holder with SDS plus shank
with the product as standard. You can find the com-
plete selection of accessories in our accessories
range.
1 609 92A 7MC • 28.11.22
a)
a)