Fein 7 205 47 Instrucciones De Uso página 12

OBJ_BUCH-0000000134-002.book Page 12 Wednesday, September 5, 2018 11:17 AM
en
12
Assembly instructions.
Before mounting or replacing cutting tool or accessories, pull the power plug.
WARNING
This preventive safety measure rules out the danger of injuries through acci-
dental starting of the power tool.
Mounting the auxiliary handle
(figure 2).
Do not apply grease and oil on inside of ten-
sioning strap!
Position the tensioning strap correctly!
Tighten handle firmly!
To loosen the clamping strap of the auxiliary
handle, turn the handle counterclockwise.
Slide the strap of the auxiliary handle in the
desired working position onto the collar until
the teeth engage into the recesses, and then
tighten.
Strap
2.
3.
4.
1.
5.
MAX
Auxiliary handle