Fein 7 205 47 Instrucciones De Uso página 15

OBJ_BUCH-0000000134-002.book Page 15 Wednesday, September 5, 2018 11:17 AM
Changing the tool.
Before mounting or replacing cutting tool or accessories, pull the power plug.
WARNING
This preventive safety measure rules out the danger of injuries through acciden-
tal starting of the power tool.
Mounting application tools (figure 6).
To loosen the lock of the drill chuck, turn the
rear sleeve toward the " " direction.
Unscrew the front sleeve to replace the appli-
cation tool.
Tighten the front sleeve and lock the drill
chuck by turning the rear sleeve toward the
" " direction.
en
15