Fein 7 205 47 Instrucciones De Uso página 7

OBJ_BUCH-0000000134-002.book Page 7 Wednesday, September 5, 2018 11:17 AM
Emission values for sound and vibration (Two-figure – specifications as per ISO 4871)
Sound emission
A-weighted emission pressure power level measured at the
L
workplace (re 20 μPa), in decibels
pA
K
Measuring uncertainty
Measured A-weighted sound power level
decibels
Measuring uncertainty K
C-weighted peak sound pressure level measured at the
L
workplace , in decibels
pCpeak
K
Measuring uncertainty
Vibrations
Mean vibrational value for drilling in metal
2
– m/s
2
– ft/s
K
Measuring uncertainty
2
– m/s
2
– ft/s
REMARK: The sum of the measured emission value and respective measuring inaccuracy
represents the upper limit of the values that can occur during measuring.
Wear hearing protection!
Measured values determined in accordance with the corresponding product standard.
Extension cable.
If the use of an extension cord
WARNING
is required, its length and con-
ductor cross-section must be adequate for the
application in order to prevent a voltage drop
in the extension cord, power loss and over-
heating of the power tool. Otherwise, the
extension cable and power tool are prone to
electrical danger, and the working efficiency is
decreased.
, in decibels
pA
L
(re 1 pW), in
wA
, in decibels
wA
, in decibels
pCpeak
, in
Recommended dimensions of extension cords
at an operating voltage of 120 V – single-
phase a. c., with only BOS 16, BOS 16-2 con-
nected:
BOS16
Max. cable length, ft Max. cable length, m
≤ 100 100 200
–200 –300
Min. conductor size Min. conductorcross-
A.W.G. section, mm
16 14 12
en
7
BOS16-2
81.1 82.1
3 3
92.1 93.1
3 3
95.2 95.6
3 3
2.4 1.9
7.68 6.08
1.5 1.5
4.9 4.9
≤ 30 30 60
– 60 –100
2
1.5 2.5 4