THOMSON SB270IBTWS Manual Del Usuario página 14

Get starte
Power
CAUTION
• Risk of product damager! Make sure that the power voltage corresponds to the voltage
printed on the back label.
• Risk of electric shock! When you unplug the AC power cord always pull the plug from the
socket. Never pull the cord.
• Before connecting the AC power cord, ensure you have completed all other connections.
Place the unit in the desired position and unravel the mains cable. Insert the cable into the supply
socket and switch on if applicable.
Pair up with the subwoofer
The wireless subwoofer automatically pairs up with the sound bar for wireless connection when you
turn on the sound bar and the subwoofer.
If no audio from the wireless subwoofer can be heard, manually pair up the subwoofer.
1. Turn on the sound bar and the subwoofer. If the connection to the sound bar is lost, the indicator
on the subwoofer blinks blue slowly.
2. Press the RESET button on the subwoofer to enter the pairing mode.
3. Press and hold the MODE/PAIR button on the main unit.
If the pairing succeeds, the indicator on the subwoofer lights up blue.
If the pairing fails, repeat the steps above.
Auto standby
• No button is pressed for 10 minutes,
• No audio from a connected device for 10 minutes.
Use
Play from external audio
You can play from an external audio device such as MP3 player through this unit.
Optical in Jack (Requires an optical cable)
1. Connect an Optical cable to the optical jack on back panel. Connect the other end of the Optical
cable to the digital audio device.
2. Press the button to turn the unit on.
3. Press the MODE button to switch to Optical In mode.
4. Use the controls on the connected device to begin playing audio routed through the unit.
Line in Jack (Requires a 3.5mm cable)
1. Connect a 3.5mm cable to the Line jack on top panel. Connect the other end of the 3.5mm cable
to an Mp3 player or other audio device.
2. Press the button to turn the unit on.
3. Press the MODE button to switch to Line In mode.
4. Use the controls on the connected device to begin playing audio routed through the unit.
- EN 5 -