Domo DO1022S Manual De Instrucciones página 26

PARTS
1. Filling opening
2. Water tank
3. Temperature indication light
4. Steam release button
5. Temperature dial
6. Carry lock
7. Soleplate
8. Thermal insulation pads
9. Control Panel
10. Cord storage
CONTROL PANEL
11. On/off button
12. Steam selection button
13. On/ off indication light
14. Descale indication light
15. Water level indication light
16. Steam indication light
BEFORE THE FIRST USE
1. Remove any stickers or protective foil from the soleplate.
2. Heat up the iron until the maximum temperature and iron on a damp cloth during a couple of
minutes to remove any possible residues from the soleplate. Iron according to the instructions in the
section «Steam ironing».
Caution:
· During the first use it is normal that a specific odeur escapes from the appliance. This odeur will
disappear after a while.
· Some particles may come out of the soleplate during the first use. This is normal. The particles are
harmless and will disappear after a while.
· When turning on the appliance, the steam generator may produce a pumping sound. This is normal.
This sound indicates that water is pumped into the steam generator.
· While the soleplate is heating up, some steam will be released automatically. This is also normal and
will last for about 3 seconds.
26
DO1022S
2
1
10
11
13 14
16
3 4 5 6
7
12
15
8
9