Danby Health+ DH016A1W-D Manual Del Propietário página 5

Idiomas disponibles

OPERATING INSTRUCTIONS

FIRST TIME SET UP

The ﬁ rst time the appliance is plugged in, the date and time must be set. The programming menu includes

the following options:

• YY - used to set the year

• NN - used to set the month

• dd - used to set the day

• HH - used to set the hour

• nn - used to set the minute

To set the date and time, follow the steps below.

1. Year Setting: Press and hold the Set button and the down arrow button at the same time for 5 seconds

to enter the programming menu. The display will ﬂ ash "YY". Press the Set button to enter the year

setting. Press the up and down buttons to choose the last two digits of the correct year. Press the Set

button to conﬁ rm the selection. The display will return to the selection menu and will ﬂ ash "YY".

2. Month Setting: Press the up button. The display will ﬂ ash "NN". This is meant to indicate the month.

Press the Set button to enter the month setting. Press the up and down buttons to choose the correct

month. Press the Set button to conﬁ rm the selection. The display will return to the selection menu and

will ﬂ ash "NN".

3. Day Setting: Press the up button. The display will ﬂ ash "dd". Press the Set button to enter the day

setting. Press the up and down buttons to choose the correct day. Press the Set button to conﬁ rm the

selection. The display will return to the selection menu and will ﬂ ash "dd".

4. Hour Setting: Press the up button. The display will ﬂ ash "HH". Press the Set button to enter the hour

setting. Press the up and down buttons to choose the correct hour. Press the Set button to conﬁ rm the

selection. The display will return to the selection menu and will ﬂ ash "HH".

5. Minute Setting: Press the up button. The display will ﬂ ash "nn". This is meant to indicate the minute.

Press the Set button to enter the minute setting. Press the up and down buttons to choose the correct

minute. Press the Set button to conﬁ rm the selection. The display will return to the selection menu and

will ﬂ ash "nn".

Note: If no buttons are pressed within 10 seconds, the control panel will close the selection menu.