Pioneer PDK-TS18 Manual De Instrucciones página 8

Additional fall prevention measures
- As a fall prevention measure against earthquakes and shocks, fasten the two safety fittings into the screw holes used for anchoring
at the rear cover of the plasma display. Pass a rope or chain (available on the market) through the fittings and securely attach the
plasma display to a wall or post.
(Do not do this when using the separately sold wall mount unit.)
- Pay attention to the rope when moving the Plasma Display.
326 (12.8)
Specifications
Model: PDK-TS18
External dimensions: (W) 1000 x (H) 221.6 x (D) 470 mm
Weight: 12.3 kg
Installing the Plasma Display on the Stand
850 (33.5)
Safety fitting
(W) 39.4 x (H) 8.72 x (D) 18.5 inchs
27.1 lbs
E-7
326 (12.8)
206 (8.1)
706 (27.8)
Unit : mm
( ) : inchs