Teac UD-505-X Manual Del Usuario página 25

Headphones settings (6.3 mm)
Make settings suitable for the headphones being connected
(page 12).
MENU
HEADPHONE 6.3mm
UNBALANCED
UNBALANCED
Unbalanced headphones
BALANCED
Balanced headphones
Balanced headphones are operated with differential drive.
The negative and positive connectors operate with opposite
polarities.
ACTIVE GROUND
Balanced headphones
The amp drives so that the negative connector of balanced head-
phones is 0 V.
To the headphones, the characteristics of the outputs become
equivalent.
Headphones settings (4.4 mm)
Make settings suitable for the headphones being connected
(page 12).
MENU
HEADPHONE 4.4mm
BALANCED
BALANCED
Balanced headphones
Balanced headphones are operated with differential drive.
The negative and positive connectors operate with opposite
polarities.
ACTIVE GROUND
Balanced headphones
The amp drives so that the negative connector of balanced head-
phones is 0 V.
To the headphones, the characteristics of the outputs become
equivalent.
Display brightness
MENU
DIMMER
BRIGHT
DARK
Dark
SLIGHTLY BRIGHT
Lit dimly
BRIGHT
Lit brightly
AUTO OFF
Unlit automatically
o The display stays unlit even when the unit is on.
Volume display
This sets how the volume is shown.
MENU
VOLUME TYPE
STEP (0-100)
STEP (0-100)
This shows the volume in steps from 0 (minimum) to 100
(maximum).
dB
This shows the volume in decibels (dB).
Screen indication
Select the information shown to the right of the playback source.
MENU
DISPLAY TYPE
VOLUME
VOLUME
The volume will be shown.
SAMPLING FREQ.
Information about the playback source will be shown.
EN
25