HIKOKI WR 36DE Instrucciones De Manejo página 10

English
Tightening mode selector function settings
Rotation speed
(min
1500
1800
2100
2400
1500
1800
2100
2400
STANDARD ACCESSORIES
In addition to the main unit (1 unit), the package contains the
accessories listed on page 240.
Standard accessories are subject to change without notice.
APPLICATIONS
Tightening and loosening of all types of bolts and nuts, used
for securing structural items
SPECIFICATIONS
The specifi cations of this machine are listed in the Table on
page 239.
NOTE
Due to HiKOKI's continuing program of research and
development, the specifi cations herein are subject to
change without prior notice.
High / Low
) mode
-1
Mode 1
Mode 2
Mode 3
Mode 4
Mode 1
Mode 2
Mode 3
Mode 4
Auto stop mode
(Auto Stop Time)
For work that requires fi ne adjustments such
as when tightening small diameter bolts.
OFF
For work that requires the power to be
suppressed during tightening.
For work that requires power and speed during
tightening.
Approx.
0.5 sec.
Tasks including the temporary fastening of
wheel nuts for vehicles or pipe fi ttings
Approx.
1 sec.
ON
Approx.
Temporary fastening of steel frames, etc.
1.5 sec.
Approx. Temporary fastening of heavy machinery,
2 sec. bridges, etc.
CHARGING
Before using the power tool, charge the battery as follows.
1. Connect the charger's power cord to the receptacle.
When connecting the plug of the charger to a receptacle,
the charge indicator lamp will blink in red (At 1- second
intervals).
2. Insert the battery into the charger.
Firmly insert the battery into the charger as shown in
Fig. 3 (on page 2).
3. Charging
When inserting a battery in the charger, the charge
indicator lamp will blink in blue.
When the battery becomes fully recharged, the charge
indicator lamp will light up in green. (See Table 1)
(1) Charge indicator lamp indication
The indications of the charge indicator lamp will be as
shown in Table 1, according to the condition of the
charger or the rechargeable battery.
10
Use