Publicidad
Idiomas disponibles
Idiomas disponibles
Fuel and its vapors are extremely
fl ammable and explosive. Fire can
cause severe burns or death.
Use unleaded petrol intended for motor
vehicle use with an octane rating of 87
[(R + M)/2] or higher.
Use SAE 30 or 10W-30 API-SJ weight
oil.
Conforms to all regulatory standards in
the country in the EU where the product
is purchased.
EurAsian Conformity Mark
Ukrainian mark of conformity
Hold the power lever down against the
1
handle to keep the engine running.
Release the power lever to stop the
product.
2
Self-propel: The lawn mower will propel
itself when the self-propel bail is pulled
towards the handle.
Guaranteed sound power level is 98 dB.
Stop the product.
Open and close the fuel valve
Variable throttle lever
4
Variable transmission lever
Replacement blade part number.
RAC409
RESIDUAL RISKS
Even when the product is used as prescribed, it is still
impossible to completely eliminate certain residual risk
factors. The following hazards may arise in use and the
operator should pay special attention to avoid the following:
■
Injury caused by vibration. Always use the right tool for
the job, use designated handles, and restrict working
time and exposure.
■
Hearing injury caused by exposure to noise. Wear
hearing protection and limit exposure
■
Injury caused by contact with the blades
■
Injury caused by thrown objects
RISK REDUCTION
It has been reported that vibrations from handheld tools
may contribute to a condition called Raynaud's Syndrome.
Symptoms may include tingling, numbness, and blanching
of the fi ngers, usually apparent upon exposure to cold.
Hereditary factors, exposure to cold and dampness, diet,
smoking, and work practices are all thought to contribute to
the development of these symptoms. There are measures
that can be taken by the operator to possibly reduce the
effects of vibration:
■
Keep your body warm in cold weather. When operating
the product, wear gloves to keep the hands and wrists
warm. It is reported that cold weather is a major factor
contributing to Raynaud's Syndrome.
■
After each period of operation, exercise to increase
blood circulation.
■
Take frequent work breaks. Limit the amount of
exposure per day.
If you experience any of the symptoms of this condition,
immediately discontinue use and see your physician.
WARNING
Injuries may be caused or aggravated by prolonged use
of a tool. When using any tool for prolonged periods,
ensure you take regular breaks.
English
Publicidad
