If the water level is too high or too low, the
appliance may not work properly, which can cau-
se damage to property/appliance.
Make sure that water is supplied under pressure
of minimum 100 kPa (1 bar) and not exceeding
1000 kPa (10 bar).
If the water supplying hoses have been modified
or damaged, this can cause damage to property/
appliance. The water supply hoses must not be
kinked, crushed, modified or cut.
The use of third-party hoses to connect the
appliance to water supply can cause damage to
property or the appliance.
Use only hoses supplied with the appliance, or
the original hoses up designed for the appliance.
The appliance is secured for transport with tran-
sit bolts. If you don't remove transit bolts before
using the appliance, the appliance may be da-
maged. Remove all transit bolts before using the
appliance for the first time.
Make sure you keep transit bolts in a safe place
for future use. If the appliance will be transported,
to avoid any damage, you must reinstall the tran-
sit bolts.
Laundry washed with detergents that contain sol-
vents and thinners pose a risk of explosion in the
drum.
Thoroughly rinse laundry with water before was-
hing in the washing machine.
76