Publicidad
2-3 Insert anchors and lag bolts
Insert lag bolt anchors [05]. Then insert lag bolts [03] through the wall plate [01] and into the anchors.
CAUTION:
Improper use could reduce the holding power of the lag bolt. To avoid potential injuries or property damage:
Be sure the anchors [05] are seated flush with the concrete surface
Tighten the lag bolts [03] only until the washers [04] are pulled firmly against the wall plate [01]
DO NOT over-tighten the lag bolts [03]
[05]
13 mm
(1/2 in.)
[04]
[01]
[05]
[03]
12
Publicidad
