Publicidad
Idiomas disponibles
Idiomas disponibles
10. PREPARE THE DECORATIVE FLUE
DO NOT REMOVE the protective plastic film covering the upper flue yet.
NOTE: Both lower and upper flues are included with the hood, but for ceilings of 9 ft. or more, discard the provided lower and upper flues
and use the optional flue extension, part no. AEEW43SS (stainless steel) or AEEW43BLS (black stainless steel) (sold separately).
Remove the upper flue from inside the lower flue. Remove protective plastic film covering the lower flue only.
Peel off both corners at the top of the upper flue.
NOTE: For non-ducted installation only, remove enough plastic film to clear the louvers.
Gently slide upper flue inside lower flue, louvers end up.
NOTE: Upper flue can be reversed to hide louvers in some applications depending on installation
heights.
11. INSTALL THE DECORATIVE FLUE
Carefully slide in place decorative flue base (notches end first) in the groove on the top of the
hood.
CAUTION
8
l
ouvers
l
ower Flue
rear Notch
HO0290
HO0294
Publicidad
