Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING: If the information in this manual is not followed
exactly, a fire or explosion may result causing property damage,
personal injury or death.
• DO NOT store or use gasoline or other flammable vapors and
liquids in the vicinity of this or any other appliance.
• WHAT TO DO IF YOU SMELL GAS:
- DO NOT try to light any appliance.
- DO NOT touch any electrical switch.
- DO NOT use any phone in your building.
- Immediately call your gas supplier from a neighbor's phone.
Follow the gas supplier's instructions.
- If you cannot reach your gas supplier, call the fire
department.
• Installation and service must be performed by a qualified
installer, service agency, or the gas supplier.
2 English
Install_DTG36P875N_DG68-01286A-00_EN+MES+CFR.indb 2
Contents
Before you begin
Important safety information
Gas cooktop components
What's in the box
Installation requirements
Pre-installation checklist
Location requirements
Gas supply requirements
Special gas requirements (gas models sold in Massachusetts)
Electrical requirements
Installation instructions
Installing your gas cooktop
Step 1. Unpack the cooktop
Step 2. Installing the cooktop.
Step 3. Connect the cooktop to gas supply
Step 4. Check for gas leaks.
Step 5. Electrical connections.
Step 6. Assemble the cooktop burners.
Step 7. Check the ignition of cooktop burners
Step 8. Checking the flame quality.
Step 9. Install the grates.
Step 10. Final installation checklist
LP (Propane) conversion instruction
Supplied parts
Converting the pressure regulator
Converting the cooktop burners
Adjusting low flame setting on cooktop burners
3
3
8
8
10
10
10
12
13
13
14
14
14
14
16
17
18
18
20
20
21
22
22
23
24
25
26
2020-05-27
11:00:26
Publicidad
