EGO LM2020SP-FC Manual Del Operador página 23

ATTACHING/REMOVING THE MULCHING INSERT
WARNING:
first stopping the motor, removing the battery pack and waiting for the blade to stop
rotating.
1. Remove the battery.
2. Lift the rear-discharge door.
3. Grasp the handle of the mulching
insert and fully insert it into the
mower, so that it is securely seated
(Fig. 10).
4. To remove the mulching insert, lift
the rear-discharge door, grasp the
handle of the mulching insert, and
pull it out.
5. Release the discharge door and
make sure it rests firmly against the
mulching insert.
NOTICE:
The mulching insert must be removed in order to install and use the grass
bag and must be re-installed when the grass bag is removed.
ATTACHING/REMOVING THE SIDE
DISCHARGE CHUTE (Fig. 11)
WARNING:
make any adjustment to the lawn mower
without first stopping the motor, removing
the battery pack and waiting for the blade
to stop rotating.
To Attach:
1. Remove the battery.
2. Lift the side-discharge door.
56-VOLT LITHIUM-ION CORDLESS MOWER — LM2020SP/LM2020SP-FC/LM2020/LM2020-FC
Do not at any time make any adjustment to the lawn mower without
Do not at any time
10
Side-discharge Door
11
Assembly
Knob
Assembly
Slot
Pivot
Side-discharge
Chute
23