Publicidad
Idiomas disponibles
Idiomas disponibles
8. Re-install the rear wheel covers
(LM2020SP/LM2020SP-FC) and rear
wheels; be sure to replace the parts
in the exact order in which they
were removed (Fig. 35a & 35b).
STORING THE MOWER
The following steps should be taken in
order to prepare the lawn mower for
storage.
1. Remove the battery pack from
the mower and store it at room
temperature in a dry location.
2. Clean the mower as described
earlier in the maintenance section.
3. Inspect the blade and replace it or
sharpen it if required.
4. Lubricate the mower.
5. Store the mower in a dry, clean location. Do not store it next to corrosive
materials, such as fertilizer or rock salt.
6. Store the mower in a covered, enclosed space, that is cool and dry and out of the
reach of children.
7. Do not cover the lawn mower with a solid plastic sheet. Plastic coverings trap
moisture around the mower, which causes rust and corrosion.
56-VOLT LITHIUM-ION CORDLESS MOWER — LM2020SP/LM2020SP-FC/LM2020/LM2020-FC
35a
Bolt
Wheel Cover
For LM2020SP/
LM2020SP-FC
35b
Bolt
Rear Wheel
For LM2020/
LM2020-FC
Dust Cover
Rear Wheel
Wave washer
Wheel Cover
Locking Screw
Wheel Axle
Dust Cover
Round Recess
facing outside
Wave Washer
Wheel Axle
45
Publicidad
