EGO LM2020SP-FC Manual Del Operador página 39

6. Replace the blade on the mower and tighten it securely (please see INSTALLING
THE BLADE).
WARNING:
high speeds. It may cause damage to the mower and could break, causing personal injury.
LUBRICATION
Lubricate with light oil as directed below at least once each season.
◾
Periodically lubricate the spring and
pivot pin in the quick-adjust lever,
the torsion spring and pivot of the
rear-discharge door with light oil to
prevent rust (Fig. 31a & 31b).
◾
Place the mower into the locked
storage position:
1. Move the cutting-height
adjustment lever toward the
front and engage it in the lowest
setting (setting 1).
2. Open the handle-locking clamps
and fully recess the side rails to
the compact position.
3. Press and hold the quick-adjust
lever with your right hand to
release the handle.
4. Gently pivot the handle toward
the front of the mower; release
the quick-adjust lever and continue to pivot the handle until you hear and feel
the lock pin engage in the locked storage position.
56-VOLT LITHIUM-ION CORDLESS MOWER — LM2020SP/LM2020SP-FC/LM2020/LM2020-FC
An unbalanced blade will cause excessive vibration when rotating at
31a
Spring
31b
Pivot
Pivot Pin
Torsion Spring
39