Publicidad
Idiomas disponibles
Idiomas disponibles
*Call AAA Rent-All at 225-291-1356 for assistance ordering parts*
Problem
A.
Restricted air flow or no air flow
B.
Filter warning light is on
C.
The turbine has no power
D.
Excessive arcing/sparking in the
turbine
IMPOrTaNT:
• The turbine motor can be damaged if not serviced properly.
Have the brushes (Kit P/N 0277243) checked for wear by an
authorized service center every 400 hours.
• Clean filters regularly. When the filter warning light comes
on, it is time to clean the filters. Clogged filters cam cause
excessive heat and possibly damage the unit.
• For additional troubleshooting information, see the manual
that came with your gun.
Specifications
Air pressure
9.5 psi
Power
120VAC, 60 Hz, 13.8 A
Turbine weight
22.5 lbs
Main hose length
30 ft
Spray gun included
Maxum II
Titan 30-Day Satisfaction Guarantee
If, within a 30-day period from the date of purchase, you are not totally satisfied with a TITAN unit, you may return it for full credit toward
another TITAN product of equal or greater value.
© Titan Tool Inc. All rights reserved.
Troubleshooting
Cause
1.
Air flow adjustment knob on the spray gun is
turned off
2.
Air filters are clogged
1.
Air filters are clogged
1.
No power at the power supply
2.
Circuit breaker has been tripped.
3.
Worn turbine brushes
1.
Worn turbine brushes
2.
Damaged commutator
Solution
1.
Adjust the air flow adjustment knob
2.
Clean or replace the filters
1.
Clean or replace the filters
1.
Check the power supply
2.
Reset the breaker. If problem persists, have turbine
inspected at an authorized Titan service center.
3.
Have the brushes replaced at an authorized Titan service
center
1.
Have the brushes replaced at an authorized Titan service
center
2.
Replace the turbine (contact a Titan service technician)
Product registration
Register your product at www.titantool.com
Serial Number Location
5
English
Publicidad
