CASO DESIGN HW 500 Touch Manual De Instrucciones página 30

12.7 Overheating protection & reset
The appliance is equipped with an overheating protection facility.
If the temperature of the appliance exceeds the critical limit the
appliance shuts off further power supply for safety reasons.
13 Design and Function
In this chapter, you'll find important information on the design and function of the device.
13.1 Overview
► Warning symbol: hot steam.
► Caution hot steam can escape at device. Risk of burns.
1 drip tray
2 cover of drip tray
3 main body
4 spout
5 control panel
6 tank cover
7 tank
8 base
► Please note that the dispensed water (at all temperature settings) is not boiled before.
Therefore, especially when preparing baby food, we recommend to boil the water first, cool
it down to room temperature and then pour it into the water tank of the device.
By pressing the reset button (1) the
appliance can be reactivated.
Unplug the device before reset. When
the device is only producing cold water
please press reset button.
Please use enclosed reset-key for the
reset-button.
Warning
Please note
30