Silvercrest SSTMC 600 A1 Instrucciones De Uso página 10

Operation
WARNING!
► The motor switches off automatically as soon as the blender 3 is removed
from the motor block 6 or the lid 2 is opened . In such cases it may be
easy to forget that the machine is still switched on . The motor will then start
unexpectedly as soon as the blender attachment 3 is fitted or the lid 2 is
closed again:
Therefore:
–
Do not insert the power plug into the wall socket until the blender 3 is
filled and mounted with its lid fitted and closed .
–
Before fitting the blender, always check to see that the appliance is
switched off or that the power plug has been removed .
–
Switch the appliance off first, pull the plug out and wait until the motor
has come to a standstill before removing the blender 3 or opening the
lid 2 .
Fitting and filling the blender
1) Remove the blender 3 from the motor block 6 in a vertical, upward motion .
2) Remove the lid 2 by rotating it anticlockwise towards position
until you can pull it upwards .
3) Fill the blender 3 to at least to the lowest line of the scale 8 and at most to the
MAX mark . For optimum results, we recommend the following maximum filling
quantities:
Food
Liquids
Yoghurt-based drinks
Milkshakes/
smoothies
Pancake mix
Baby food
Mayonnaise
Vegetable soup
Ice cubes
SSTMC 600 A1
Recom­
Max . filling
mended
quantity
1750 ml
1250 ml
1250 ml
1250 ml
750 ml
2 eggs
250 ml oil
1500 ml
250 ml
(approx . 14‒15
pieces)
(see Fig 1)
Recommended
processing time
level
1‒3 60 sec .
2‒5 90 sec .
2‒5 60‒90 sec .
3‒5 90 sec .
5 3 min .
3‒5 90‒120 sec .
3‒5 3 min .
P 12x
GB │ IE │ 7 ■