Garland GRASS KEEPER 190 W Manual De Instrucciones página 36

English
Do not allow anybody to enter the workng area.
Ths working perimeter is 15 metres and this is a
dangerous zone.
When moving from one working area to the next, turn
off the engine.
Never let the machine unattended.
Do not use any accessories that are not originals
and that have not been recommended by the
manufacturer. Use of other accessories can cause
accidents and can be dangerous for the end user
and those nearby as well as causing damages to the
machine.
Always follow the security rules that we indicate in the
manual.
7.1. HOW TO HOLD THE MACHINE AND GUIDE IT
WHILST WORKING
Whilst you work, hold the lawnmower
with both hands.
Always be behind the lawnmower
and push it whilst you are behind it.
Do not run whilst working, walk at a constant pace
that allows the machine to cut the grass without too
much effort.
7.2. ADJUSTING THE CUTTING HEIGHT
Attention! Stop the machine and wait for the
cutting blade to come to a complete standstill before
adjusting the cutting height. The blades need a few
moments to stop completely after stopping the engine.
To adjust the cutting height of the front wheels:
- Place the machine upside down.
- Pull the axis of the front wheel towards the front
part of the machine.
- Place the axis of the wheel at the height required
for cutting.
hacia delante o atrás hasta la altura deseada.
Note: Ensure that both front wheels are in the same
cutting position.
To adjust the cutting height of the front wheels:
- Place the machine on its side.
- Pull the axis of the back wheels towards the
lawnmower´s catcher.
- Place the axis of the wheel at the height required
for cutting.
Note: Ensure that both front wheels are in the same
cutting position.
7.3. CUTTING WITH THE LAWNMOWER
This mower has 2 different work settings (harvesting
mowing and mulching mowing). Before starting work
you must configure the mower to work in one of two
ways.
Cut with collection:
In this configuration the mower will cut the grass and
send it to the collection bag. The grass will be cut and
the rest of the grass cut inside the bag.
36/136