Descargar Imprimir esta página

Reliable BRIO PRO 1000CT Manual De Instrucciones página 10

Publicidad

Idiomas disponibles

Idiomas disponibles

STEAM REGULATIONS LIGHTS AND HANDLE CONTROL
The two yellow lights signal the three possible regulations of steam quantity/strength. The
first steam regulation on-light (C) corresponds to the minimum steam quantity, position 1 on
the handle (G). The second regulation on- light (D) corresponds to a medium steam quantity,
position 2 on the handle (H). Both the first and second regulation on-lights (C + D) correspond
to the maximum steam quantity, position 3 on the handle (I).
HOT WATER INJECTION LIGHT AND HANDLE CONTROL
This yellow light signals the activation of the hot water Injection feature. When this light (E)
is on (position 4 on the handle (J), the steam is blended with hot water, making it ideal for
rinsing applications.
USING THE ACCESSORIES
CONNECTING THE ACCESSORIES
Lift the hinged cover (7) on the lower front of the steam generator and fit the hose plug con-
nector (16) by depressing the red button and pushing firmly in until a 'click' is heard indicating
that the hose plug is inserted all the way. The hose MUST be properly connected, otherwise
the solenoid valve will not function and steam will not be delivered through the hose or
attachments. To deliver steam, activate the button situated on the underside of the handle.
LARGE RECTANGULAR FLOOR BRUSH
For cleaning hard floors, attach the extension tubes (15) to the angle adapter to use the large
rectangular brush (8). Attach a dry cloth to the brush for the most effective cleaning of hard
floors or carpet surface cleaning.
TRIANGULAR / UPHOLSTERY BRUSH
The triangular brush (9) is used where it is impossible or awkward to use the large brush.
UPHOLSTERY, DRAPERY, BEDDING, ETC.
Cover the brush with a clean dry cloth fixing it through the spring. Use a rapid back and forth
motion, making sure that you do not over saturate the material with steam.
IMPORTANT: Prior to cleaning, do a patch test in an area that is not easily seen before you
begin. Steam and moisture may cause damage to some surfaces.
07

Publicidad

loading