Atlas Copco S2451-P Instrucciones De Operación Y Seguridad página 56

Service instructions
Service Instructions
Tightening of threaded connections
The tightening torques indicated in the spareparts list are established to achieve the correct
clamping force and preventing the parts from coming loose. At service these parts must be
able to open up without being destroyed. At special circumstances (depending on application
and usage) the parts may however come loose after some time of operation. In such cases
the torque could be increased 10-20% and if necessary some type of low or medium
threadlocking fluid could also be applied.
Example
Operating Instructions
Starting
Setting of torque
Free speed / Air consumption
Model
S2451-P
56
+ 10-20% Nm
Change of bit
6.3 bar
r / min
800
© Atlas Copco Tools - 9836 4734 00
LOCTITE
Reversing
l / s
7.1
S2451-P