CHAPTER -3: USING YOUR FRIDGE FREEZER
Economy Mode
Purpose
Energy savings. During periods of less frequent use (door
opening) or absence from home, such as a holiday, Eco program
can provide optimum temperature whilst saving power.
How to Use
• Press
icon (#12 on control panel diagram), until the
'Eco Mode' icon
• Once the 'Eco mode' has been set, the machine will beep
to confirm the mode has been switched on.
• After the beep the both the fridge and freezer temperature setting (#1 and #3) will display an 'E'.
• Eco Mode can be cancelled by pressing the
During this mode:
• The freezer and fridge temperature may be adjusted however the adjustment will not be made until Eco
Mode is cancelled. When economy mode is cancelled, the selected setting values will be activated and the
temperature(s) will be adjusted.
• Super Cool or Super Freeze mode can be selected, however by selecting either modes Eco Mode is cancelled
immediately.
• Holiday mode can only be selected after cancelling the economy mode.
Holiday Mode
Purpose
Holiday mode is to be used if the device is to be left for an extended period. During Holiday mode only the freezer
compartment remains active.
How to Use
• Press
icon (#12 on control panel diagram), until the
'Holiday Mode' icon
• Once the 'Holiday mode' has been set, the machine will
beep to confirm the mode has been switched on.
• After the beep the fridge will display '--' and the freezer will
display the -18
C set temperature.
o
• Holiday Mode can be cancelled by pressing the
During this mode:
• Freezer and fridge temperature may be adjusted however the adjustment will not be made until Holiday Mode is
cancelled. When Holiday mode is cancelled, the selected setting values will be activated and the temperature(s)
will be adjusted.
• Super Cool or Super Freeze mode can be selected, however by selecting either modes Holiday Mode is
cancelled immediately.
• Eco Mode can only be selected after Holiday mode has been cancelled.
Drink Cool Mode
Purpose
This mode is used to cool drinks within an adjustable time frame.
How to Use
• Press
icon (#12) and
for five seconds.
• The cooler temperature set indicator will start showing
'05'. This value will flash on screen
• Users can either press
time period (05, 10, 15, 20, 25 or 30 minutes)
• When you select the time the numbers will blink 3 times on
screen and sound beep beep. If the user do not press any
button within 2 seconds the time will be set.
• The machine will then set the time, the remaining time will be shown on screen
• Once the total time has elapsed, an alarm will sound
appears (#6).
appears (#5).
(#9) icons simultaneously
or
buttons to adjust the
Icon (#12).
icon (#12).
EN -9-