Settings; Canceling The Demo Mode; Basic Setting Operation; General Setup (General) - Sony CDX-G1280UM Manual De Instrucciones

Settings

Canceling the DEMO Mode

You can cancel the demonstration display
which appears when the source is off and
the clock is displayed.
1
Press MENU, rotate the control dial to
select [GENERAL], then press it.
2
Rotate the control dial to select [SET
DEMO], then press it.
3
Rotate the control dial to select [SET
DEMO-OFF], then press it.
The setting is complete.
4
Press (back) twice.
The display returns to normal reception/
play mode.

Basic Setting Operation

You can set items in the following setup
categories:
General setup (GENERAL), Sound setup
(SOUND), Display setup (DISPLAY)
1
Press MENU.
2
Rotate the control dial to select the
setup category, then press it.
The items that can be set differ
depending on the source and settings.
3
Rotate the control dial to select the
options, then press it.
To return to the previous display
Press (back).
10
GB

General Setup (GENERAL)

LANGUAGE (except for India models)
Changes the display language: [ENGLISH],
[SPANISH].
DEMO (demonstration)
Activates the demonstration: [ON], [OFF].
CLOCK-ADJ (clock adjust) (page 6)
TUNER-STP (tuner step) (page 6) (except for
Argentine models)
(Available only while the source is off and
the clock is displayed.)
CAUT ALM (caution alarm)
Activates the caution alarm: [ON], [OFF]
(page 6).
(Available only while the source is off and
the clock is displayed.)
BEEP
Activates the beep sound: [ON], [OFF].
AUTO OFF
Shuts off automatically after a desired
time when the unit is turned off: [ON]
(30 minutes), [OFF].
STEERING
Registers/resets the setting of the
steering wheel remote control.
(Available when connected with the
connection cable (not supplied).)
(Available only while the source is off and
the clock is displayed.)
STR CONTROL (steering control)
Selects the input mode of the connected
remote control. To prevent a malfunction,
be sure to match the input mode with the
connected remote control before use.
CUSTOM
Input mode for the steering wheel
remote control
PRESET
Input mode for the wired remote
control excluding the steering wheel
remote control (automatically selected
when [RESET CUSTOM] is performed.)