WARNING
Ensure that the coin cell is kept
out of the reach of children.
Coin cells are dangerous.
Coin cells must never be swallowed or inserted into
u
any other part of the body. If you suspect that
someone has swallowed a coin cell or that a coin cell
has entered the body in another way, seek medical at-
tention immediately. Swallowing coin cells can result in
severe internal burns and death within 2 hours.
Ensure that coin cell replacement is carried out prop-
u
erly. There is a risk of explosion.
Only use the coin cells listed in this operating manual.
u
Do not use any other coin cells or other forms of electrical
power supply.
Do not attempt to recharge the coin cell and do not
u
short circuit the coin cell. The coin cell may leak, ex-
plode, catch fire and cause personal injury.
Remove and dispose of drained coin cell correctly.
u
Drained coin cell may leak and damage the product or
cause personal injury.
Do not overheat the coin cell or throw it into fire. The
u
coin cell may leak, explode, catch fire and cause personal
injury.
Do not damage the coin cell and take the coin cell
u
apart. The coin cell may leak, explode, catch fire and
cause personal injury.
Do not allow damaged coin cells to come into contact
u
with water. Leaking lithium may mix with water to create
hydrogen, which could cause a fire, an explosion, or per-
sonal injury.
If you cannot close the cover, stop using the Bluetooth®
u
module, remove the button cell and have the module re-
paired.
Only for Australia
u
Caution! Battery is hazardous and is to
be kept away from children (whether the
battery is new or used). Battery can
cause severe or fatal injuries in 2 hours or
less if it is swallowed or placed inside any
part of the body. Medical attention
should be sought immediately if it is sus-
pected the battery has been swallowed
or placed inside any part of the body.
Bosch Power Tools
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for driving and loosening screws
and for drilling in wood, metal, ceramic and plastic. The GSB
is also designed for impact drilling in brick, masonry and
stone.
®
With the Bluetooth
Low Energy Module GCY 42 inserted,
power tool data and settings can be transferred between the
power tool and a mobile device by means of Bluetooth
less technology.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
Tool holder
(2)
Keyless chuck
(3)
Torque presetting ring
(4)
Operating mode presetting ring
(GSB 18V-90 C)
(5)
Gear selector switch
a)
(6)
Belt clip
a)
(7)
Rechargeable battery
a)
(8)
Battery release button
(9)
User interface
(10) Bluetooth® Low Energy Module cover GCY 42
(11) Rotational direction switch
(12) On/off switch
(13) Handle (insulated gripping surface)
a)
(14) Bit holder
User interface
(15) Status indicator for power tool
(16) LED for KickBack Control
(17) Button for KickBack Control
(18) Worklight (LED)
(19) Button for Precision Clutch
(20) LED for Precision Clutch
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
English | 17
®
wire-
1 609 92A 6GU | (23.06.2022)